ATV paths, hunting access, foot trails, and maintenance roads cut clean through the woods. Selective clearing — we cut the corridor and keep the canopy you want.
Recreational trails on private property are a particular kind of work — you're not clearing the land, you're cutting a corridor through it. The trees that line the trail are the whole point. They stay.
A tracked forestry mulcher is the right tool for this. The head cuts a defined width (usually 6 to 10 feet, depending on use), grinds the brush and saplings in place, and leaves the standing canopy intact above. No chipping, no piling, no debris trucks.
Common asks on the big rural parcels of Middleborough, Carver, Lakeville, Halifax, and Plympton; on the wooded estates of Sherborn, Dover, and Carlisle; on the South Shore acreage in Duxbury, Norwell, and Pembroke; and along the Rehoboth and Seekonk Massachusetts–Rhode Island border: ATV/UTV loops, hunting walk-ins, snowmobile corridors, and foot trails connecting different parts of a larger parcel.
You tell us where you want the trail and how wide. We walk it with you, flag the corridor edges, and identify any trees or features you want preserved within the path. Then the machine works the corridor — clean, controlled, and contained.
The mulch layer left behind is actually useful on a trail — it gives the corridor footing through the first rain, holds the soil on grade changes, and breaks down over a season to firm up the path.
For larger rural parcels — the 10, 20, and 50-acre holdings common in Middleborough, Carver, Lakeville, Bolton, and Harvard — we can cut connecting trails between cleared areas, fields, or access roads. We can also reopen old logging roads that the woods have taken back.
Recreational, working, or somewhere in between. The machine handles the cut the same way; the width and finish change.
Loops and connectors for recreational use. Typical width 8 to 10 feet. We can cut around terrain features and keep the trail interesting rather than straight.
Walk-in trails to stand sites, food plot edges, and connector paths between management zones. Narrower cuts (4 to 6 feet) are common — enough room to walk in with a tree stand.
Hiking trails on private property, dog-walking loops, or scenic walks connecting features of a larger parcel. Tighter widths, selective clearing of the floor only.
Working access through wooded portions of a property — for forestry equipment, well-and-septic maintenance, or just getting a truck to the back of the lot.
Wider tracked-vehicle corridors, often connecting between cleared fields or following old logging routes. The mulch base helps with snow grooming later.
Clearing a walkable corridor along your full property line — useful for fence inspection, posting boundaries, or surveying. Common on multi-acre parcels in Sherborn, Dover, Carlisle, Concord, and Middleborough.
From first call to finished property, here's what to expect.
We meet you on-site and walk the proposed trail line on foot. You point out features to preserve, places where the trail should curve, and any tight spots. We flag the corridor edges with marking tape.
Different uses call for different widths. ATV/UTV typically runs 8 to 10 feet wide. Hunting walk-ins run 4 to 6. Snowmobile corridors run 10 to 12. We confirm the spec before any cutting starts.
The tracked machine works the trail length, mulching brush and saplings in the corridor while leaving the flagged canopy and feature trees intact. Most residential trails run a half-day to two days depending on length and density.
We walk the finished trail with you. If it needs widening, tightening, or extensions later, we can come back. Most trails want a light maintenance pass every two to three years to keep the regrowth in check.
Rough length, intended use, and a sense of the terrain — we'll set up a free site visit, walk the proposed route with you, and give you a flat-price proposal.
If we don't pick up, we're in the machine. Leave a message — we'll call right back.
Metro West | Southeastern Mass | The Cape | Rhode Island